Dell PowerConnect W-7200 Series Reference Manual

Also see for PowerConnect W-7200 Series: Installation guide

Contents

Dell PowerConnect W-7200 Series Reference Manual Manual pdf 1183 page image

show port statusshow port statusDescriptionDisplays the status of all ports on the controller.SyntaxNo parameters.ExampleThe output of this command shows the status of all ports in the controller.(host) # show port statusPort Status-----------Slot-Port PortType adminstate operstate poe Trusted SpanningTree PortMode--------- -------- ---------- --------- --- ------- ------------ --------1/0 FE Enabled Up Enabled Yes Forwarding Access1/1 FE Enabled Down Enabled Yes Disabled Access1/2 FE Enabled Down Enabled Yes Disabled Access1/3 FE Enabled Down Enabled Yes Disabled Access1/4 FE Enabled Down Enabled Yes Disabled Access1/5 FE Enabled Down Enabled Yes Disabled Access1/6 FE Enabled Down Enabled Yes Disabled Access1/7 FE Enabled Down Enabled Yes Disabled Access1/8 FE Enabled Down Enabled Yes Disabled Access1/9 FE Enabled Down Enabled Yes Disabled Access1/10 FE Enabled Down Enabled Yes Disabled Access1/11 FE Enabled Down Enabled Yes Disabled Access1/12 FE Enabled Down Enabled Yes Disabled Access1/13 FE Enabled Down Enabled Yes Disabled Access1/14 FE Enabled Down Enabled Yes Disabled Access1/15 FE Enabled Down Enabled Yes Disabled Access1/16 FE Enabled Up Enabled Yes Forwarding Access...Command HistoryThis command was available in ArubaOS 3.3.2Command InformationPlatforms Licensing Command ModeAll platforms Base operating system Config or Enable mode on master or localcontrollersDell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show port status | 1183