Dell PowerConnect W-7200 Series Reference Manual

Also see for PowerConnect W-7200 Series: Installation guide

Contents

Dell PowerConnect W-7200 Series Reference Manual Manual pdf 1294 page image

1294 | show usb Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guideshow usbcrypto-localshow usb [cellular|ports|test|verbose]DescriptionDisplay detailed USB device information.SyntaxParameter Descriptioncellular Enter the keyword cellular to display cellular devices.ports Enter the keyword ports to display detailed TTY port information such as signalstrength.test Enter the keyword test to test the USB TTY ports.NOTE: Testing an invalid modem port may cause the controller to “hang”. Toresolve this, unplug and re-plug the modem.verbose Enter the keyword verbose to display detailed USB information including serialnumber and USB type.ExamplesThe USB Device table, in the example below, displays the USB port is in the 'Device Ready' state, meaning that theport has passed the diagnostic test and is ready to send and receive data.(host) (config-cellular new_modem)# show usbUSB Device Table----------------Address Product Vendor ProdID Serial Type Profile State------- ------- ------ ------ ------ ---- ------- -----18 Novatel Wireless CDMA 1410 4100 091087843891000 Cellular new_modem DevicereadyBelow is an example of the show usb verbose display output (partial).(host) #show usb verbose...T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1P: Vendor=1410 ProdID=4100 Rev= 0.00S: Manufacturer=Novatel Wireless Inc.S: Product=Novatel Wireless CDMAS: SerialNumber=091087843891000C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA...Command HistoryIntroduced in ArubaOS 3.4.