18 | aaa authentication captive-portal Dell PowerConnect W-Series ArubaOS 6.2 | Reference GuideParameter Description Range Defaultwelcome-page URL of the page that appears after logon andbefore redirection to the web URL. This canbe set to any URL.— /auth/we-lcome.htmlwhite-list Name of an existing white list on an IPv4 orIPv6 network destination. The white listcontains authenticated websites that a guestcan access. If you have not yet defined anetdestination, use the CLI commandnetdestination to define a destination host orsubnet before you add it to the whitelist— —Usage GuidelinesYou can configure the Captive Portal authentication profile in the base operating system or with the NextGeneration Policy Enforcement Firewall (PEFNG) license installed. When you configure the profile in the baseoperating system, the name of the profile must be entered for the initial role in the AAA profile. Also, when youconfigure the profile in the base operating system, you cannot define the default-role.ExampleThe following example configures a Captive Portal authentication profile that authenticates users against thecontroller’s internal database. Users who are successfully authenticated are assigned the auth-guest role.To create the auth-guest user role shown in this example, the PEFNG license must be installed in the controller.aaa authentication captive-portal guestnetdefault-role auth-guestuser-logonno guest-logonserver-group internalCommand HistoryVersion DescriptionArubaOS 3.0 Command introduced.ArubaOS 6.0 The max-authentication-failures parameter no longer requires a license.ArubaOS 6.1 The sygate-on-demand, black-list and white-list parameters were added.ArubaOS 6.2 the auth-protocol parameter was added, and the user-chap parameter was dep-recated.Command InformationPlatforms Licensing Command ModeAll platforms Base operating system, except fornoted parametersConfig mode on master controllers
