Dell PowerEdge 2900 Manual
Also see for PowerEdge 2900: Getting startedInstallation informationInstallation guideInstallation guideUpdate
                          | |
Contents
| 
10 Tower-to-Rack Conversion GuideFigure 1-2. Removing the Tower BezelPreparing the System for Conversion1 Turn off the system and attached peripherals, and disconnect the system from the electrical outletand peripherals.2 Note the order of the hard drives in your system and remove all hard drive carriers and drive blanksfrom the drive bays.3 If present, remove the filler panels from the peripheral bay.NOTE: It is not necessary to remove any devices installed in the peripheral bay.4 If present, unlock and remove the Kensington cable lock on the back of the system chassis.CAUTION: The system may weigh up to 45 kilograms (100 pounds) when fully loaded. To prevent personal injury,do not attempt to move the system by yourself.5 Place the system on its side on a flat, level work surface and orient the system so that the feet hang overthe edge of the table.1 bezel 2 keylock 3 release latch312book.book Page 10 Friday, May 26, 2006 3:03 PM |
Related manuals for Dell PowerEdge 2900
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine