34 BMC Management Utilityw w w . d e l l . c o m | s u p p o r t . d e l l . c o mOptionsNOTE: The following options cannot be used independently. One or more IPMISH command must followthe option.-com serial_portSpecifies the serial port used when establishing an IPMI session to the managed system. For a systemrunning Windows, the management station port can be 1, 2, 3, and so on. For systems running RedHat Linux, the management station port can be ttyS0, ttyS1, ttyS2, and so on.-baud baud_rateSpecifies the communication baud rate over the serial channel, such as 9600 or 19200. The baudrate for the serial channel should match the baud rate set in the managed system.-flow flow_controlSpecifies the data flow control method. There are two flow control options: CTS (hardware flowcontrol) and NONE (no flow control).-u usernameSpecifies the BMC username used to connect to the managed system.-p passwordIPMI Help Option -helpSynopsisipmish -help [command]DescriptionThis option is used to display the following information:• A summary page for all commands• A summary of all subcommands for a single command• A detailed description of a command-subcommand combinationOptions-help commandA command list and a capsule description of options are printed if no argument is given. Whenthere is an argument specifying a valid command, the help option displays a detailed description ofthe command. See Figure 3-3 and Figure 3-4.
