Dell PowerEdge C1100 Use Instructions

Also see for PowerEdge C2100: Manual Portfolio guide Getting started guide Getting started guide Hardware owner's manual

Using the Baseboard Management Controller 17View the following information provided on the Console Redirection page to ensure that a consoleredirection session is available.Email Alert DestinationWhen the Dell Remote Management Controller senses a platform event, such as an environmentalwarning or a component failure, an alert message can be sent to one or more email addresses. TheEmail Alert Destination window enables you to enter email addresses, IP addresses, and to activatethe alerts for each address.To set up a destination to receive alerts, perform the following steps:1 Click an Email Alert Number.The Set Email Alert window displays.2 Enable/Disable the alert email address, enter the destination email address, and enter a briefdescription for the Subject of the email.3 Click Apply Changes.4 Click Go Back To the Email Alert Destination Page.5 Enter the SMTP (e-mail) Server IP Address settings.6 Click Apply Changes.Table 1-15. Console Redirection ConfigurationItem DescriptionEnabled Checked indicates enabled; unchecked indicates disabled.Max Sessions View the maximum number of console redirection sessions that arepossible.Active Sessions View the number of active console sessions.Video Encryption Enabled Checked indicates enabled; unchecked indicates disabled.Table 1-16. Destination Email AddressItem DescriptionEmail Alert Number You can set up to four email destinations to receive alerts.State Enabled indicates that the email address settings are active.Disabled indicates that the email address settings are not active.Destination Email Address The email address that receives the alert messages.