Dell PowerEdge E06S Series Hardware Owner's Manual

Also see for PowerEdge R910: Manual Update Update Technical guide Update

Contents

Dell PowerEdge E06S Series Hardware Owner's Manual Manual pdf 118 page image

118 Installing System ComponentsRemoving the Cooling Fan AssemblyCAUTION: Many repairs may only be done by a certified service technician.You should only perform troubleshooting and simple repairs as authorized inyour product documentation, or as directed by the online or telephone serviceand support team. Damage due to servicing that is not authorized by Dell is notcovered by your warranty. Read and follow the safety instructions that camewith the product.1 Turn off the system, including any attached peripherals, and disconnectthe system from its electrical outlet.2 Open the system. See "Opening the System" on page 89.3 If applicable, remove the memory-riser blanks. See "Removing a Memory-Riser Blank" on page 99.4 Remove the memory risers. See "Removing a Memory Riser" on page 100.5 Remove the fans from the cooling fan assembly. See "Removing a CoolingFan" on page 116.6 Pull the blue release tabs in the direction of the arrows to release thehandles on the cooling fan assembly. See Figure 3-17.7 Grasp the handles and lift the cooling fan assembly out of the system. SeeFigure 3-17.