PE RC 3/ SC Har d war e Ins ta l lati on 111Step 5—Install PERC 3/SCChoose a 3.3 V or 5 V PCI slot and align the PERC 3/SC card bus connectorto the slot. Press down gently but firmly to make sure that the card isproperly seated in the slot. The bottom edge of the controller card shouldbe flush with the slot. Figure 8-4 shows PCI slots on a motherboard.F i g u r e 8 - 4 . P C I S l o t s o n M o t h e r b o a r d
