120 PERC 3/ DC or PERC 3/ DCL Har dwar e I nst allat ionw w w . d e l l . c o m | s u p p o r t . d e l l . c o mPERC 3/DCL Card LayoutF i g u r e 9 - 2 . P E R C 3 / D C L C a r d L a y o u tInstallation StepsThe steps for installing the RAID controller are shown below. See thefollowing pages for more information about each step.1 Unpack the PERC 3/DC or PERC 3/DCL.2 Power off the host system.3 Set jumpers.4 Set SCSI termination.5 Install the PERC 3/DC or PERC 3/DCL controller.6 Select and set target IDs for SCSI devices.J7 Channel 0ExternalUltra-High68-pin SCSIConnectorJ2J3J4 Channel 0 InternalHigh-Density 68-pinSCSI ConnectorJ5 Channel 1 InternalHigh-Density 68-pinSCSI ConnectorJ16J18J19J17J13J14DensityJ15 Channel 1ExternalUltra-High68-pin SCSIConnectorDensityJ16 Channel 0 Terminator Power EnableJ18 Channel 1 Power EnableJ19J8 Serial EPROMJ9 Onboard BIOS EnableJ10 NVRAM ClearJ11 Serial Port ConnectorJ13 Dirty CacheJ14 SCSI ActivityJ17 I2CJ11J9J10J8
