About Boot ManagerBoot Manager enables you to add, delete, and arrange boot options. You can also access System Setupand boot options without restarting the system.Entering Boot ManagerThe Boot Manager screen allows you to select boot options and diagnostic utilities.1. Turn on or restart your system.2. Press when you see the message = Boot Manager.If your operating system begins to load before you press , allow the system to finish booting,and then restart your system and try again.Boot Manager main menuMenu Item DescriptionContinue Normal Boot The system attempts to boot to devices startingwith the first item in the boot order. If the bootattempt fails, the system continues with the nextitem in the boot order until the boot is successfulor no more boot options are found.One Shot Boot Menu Takes you to the boot menu where you can selecta one time boot device to boot from.Launch System Setup Enables you to access the System Setup.Launch Lifecycle Controller Exits the Boot Manager and invokes the LifecycleController program.System Utilities Launches system utilities menu such as systemdiagnostics and UEFI shell.About Dell Lifecycle ControllerDell Lifecycle Controller allows you to perform useful tasks such as configuring BIOS and hardwaresettings, deploying an operating system, updating drivers, changing RAID settings, and saving hardwareprofiles. For more information about Dell Lifecycle Controller, see the documentation at dell.com/esmmanuals.Changing the boot orderYou may have to change the boot order if you want to boot from a USB key or an optical drive. Theinstructions given below may vary if you have selected BIOS for Boot Mode.1. In the System Setup Main Menu, click System BIOS → Boot Settings.2. Click Boot Option Settings → Boot Sequence.3. Use the arrow keys to select a boot device, and use the <+> and <-> keys to move the device downor up in the order.30
