62 Using the System Setup Program and UEFI Boot ManagerSATA Settings ScreenLogical Processor(Enabled default)On processors that support Simultaneous Multi-Threading (SMT) technology, each processor coresupports up to two logical processors. If this field is set toEnabled, the BIOS reports both logical processors. If setto Disabled, only one logical processor is monitored bythe BIOS.Virtualization Technology(Disabled default)NOTE: Disable this feature if your system will not berunning virtualization software.Enabled permits virtualization software to use thevirtualization technology incorporated in the processor.Execute Disable(Enabled default)Enables or disables Execute Disable Memory ProtectionTechnology.Number of Cores perProcessor(All default)If set to All, the maximum number of cores in eachprocessor is enabled.Turbo Mode(Enabled default)If Turbo Boost Technology is supported by theprocessor(s), enables or disables Turbo Mode.C States(Enabled default)When set to Enabled, the processor(s) can operate in allavailable power states.Processor 1 Family -Model-SteppingDisplays the family, model, and stepping of the selectedprocessor.Option DescriptionEmbedded SATA(ATA Mode default)ATA Mode enables the integrated SATA controller. Offdisables the controller.Port A(Auto default)Auto enables BIOS support for the device attached toSATA port A. Off disables BIOS support for the device.Port B(Off default)Auto enables BIOS support for the device attached toSATA port B. Off disables BIOS support for the device.Port C(Off default)Auto enables BIOS support for the device attached toSATA port C. Off disables BIOS support for the device.Option Description
