Using the System Setup Program and UEFI Boot Manager 75Deleting or Changing an Existing Setup Password1 Enter the System Setup program and select the System Security.2 Highlight Setup Password, press to access the setup passwordwindow. Press twice to clear the existing setup password.The setting changes to Not Enabled.3 If you want to assign a new setup password, perform the steps in "Assigninga Setup Password" on page 74.Embedded System ManagementThe Unified Server Configurator (USC) is an embedded utility that enablessystems and storage management tasks from an embedded environmentthroughout the server’s lifecycle.The USC can be started during the boot sequence and can functionindependently of the operating system.NOTE: Certain platform configurations may not support the full set of featuresprovided by USC.The following features of USC are supported on systems with BaseboardManagement Controller (BMC):• Installing an operating system• Running diagnostics to validate the memory, I/O devices, processors,physical disks, and other peripheralsWhen an optional iDRAC6 Express card is installed, USC provides thefollowing additional features:• Downloading and applying firmware updates• Configuring hardware and firmwareFor more information about setting up USC, configuring hardware andfirmware, and deploying the operating system, see the Dell Unified ServerConfigurator User’s Guide on the Dell Support website atsupport.dell.com/manuals.
