Option DescriptioniDRAC IP Displays the IPv4 or IPv6 addresses for iDRAC8. Addresses include DNS (Primaryand Secondary), Gateway, IP, and Subnet (IPv6 does not have Subnet).MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.Name Displays the name of the Host, Model, or User String for the system.Number Displays the Asset tag or the Service tag for the system.Power Displays the power output of the system in BTU/hr or Watts. The display format canbe configured in the Set home submenu of the Setup menu.Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display formatcan be configured in the Set home submenu of the Setup menu.Diagnostic indicatorsThe diagnostic indicators on the system front panel display error status during system startup.NOTE: The diagnostic indicators are not present if the system is equipped with an LCD display.NOTE: No diagnostic indicators are lit when the system is turned off. To start the system, plug it intoa working power source and press the power button.Table 7. Diagnostic indicatorsIcon Description Condition Corrective actionHealthindicatorIf the system is turned onand in good health, theindicator turns solid blue.None required.The indicator flashes amberif the system is turned on orin standby, and if any errorexists (for example, a failedfan or hard drive).Check the System Event Log or systemmessages for the specific issue. For moreinformation about error messages, see theDell Event and Error Messages ReferenceGuide at Dell.com/openmanagemanuals >OpenManage software.Invalid memory configurations can causethe system to halt at startup without anyvideo output. See Getting help.Hard driveindicatorThe indicator flashes amberif there is a hard drive error.Check the System Event Log to determinethe hard drive that has an error. Run theappropriate Online Diagnostics test. Restartthe system and run embedded diagnostics(ePSA). If the hard drives are configured in aRAID array, restart the system and enter thehost adapter configuration utility program.ElectricalindicatorThe indicator flashes amberif the system experiences anelectrical error (for example,Check the System Event Log or systemmessages for the specific issue. If it is dueto a problem with the PSU, check the LED16
