Figure 34. Removing and installing the SD vFlash media card1. SD vFlash media card 2. SD vFlash media-card slot3. To install an SD vFlash media card, insert the contact-pin end of the SD vFlash media card into thecard slot on the module.NOTE: The slot is keyed to ensure correct insertion of the card.4. Press the card inward to lock it into the slot.Internal dual SD module (optional)The Internal Dual SD Module (IDSDM) card provides two SD card slots. This card offers the followingfeatures:• Dual card operation — maintains a mirrored configuration by using SD cards in both the slots andprovides redundancy.NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen ofSystem Setup, the information is replicated from one SD card to another.• Single card operation — single card operation is supported, but without redundancy.Removing an internal SD cardPrerequisites1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.90
