Next steps1. Replace the cooling shroud.2. Follow the procedure listed in After working inside your system.Related TasksRemoving the cooling shroudInstalling the cooling shroudInstalling the integrated storage controller cardPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.3. Remove the cooling shroud.4. Keep the #2 Phillips screwdriver ready.Steps1. Align the end of the integrated storage-controller card with the integrated storage-controller cardholder.2. Lower the connector side of the integrated storage-controller card into the integrated storage-controller card connector on the system board.Ensure that the tabs on the system board align with the screw holes on the integrated storage-controller card.3. Align the screws on the integrated storage-controller card cable with the screw holes on theconnector.4. Tighten the screws to secure the integrated storage-controller card cable with the integratedstorage-controller card connector on the system board.Next steps1. Replace the cooling shroud.2. Follow the procedure listed in After working inside your system.Related TasksRemoving the cooling shroudInstalling the cooling shroudHeat sinks and processorsUse the following procedure when:• Installing an additional processor• Replacing a processor95
