Option DescriptioniDRAC Select DHCP or Static IP to configure the network mode. If Static IP is selected,the available fields are IP, Subnet (Sub), and Gateway (Gtw). Select Setup DNS toenable DNS and to view domain addresses. Two separate DNS entries are available.Set error Select SEL to display LCD error messages in a format that matches the IPMIdescription in the SEL. This is useful when trying to match an LCD message with anSEL entry.Select Simple to display LCD error messages in a simplified user-friendlydescription. For more information on error messages, see the Dell Event and ErrorMessages Reference Guide at dell.com/esmmanuals.Set home Select the default information to be displayed on the LCD Home screen. See Viewmenu to see the options and option items that can be set as the default on theHome screen.View menuNOTE: When you select an option in the View menu, you must confirm the option beforeproceeding to the next action.Option DescriptioniDRAC IP Displays the IPv4 or IPv6 addresses for iDRAC8. Addresses include DNS (Primaryand Secondary), Gateway, IP, and Subnet (IPv6 does not have Subnet).MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.Name Displays the name of the Host, Model, or User String for the system.Number Displays the Asset tag or the Service tag for the system.Power Displays the power output of the system in BTU/hr or Watts. The display format canbe configured in the Set home submenu of the Setup menu.Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display formatcan be configured in the Set home submenu of the Setup menu.Diagnostic indicatorsThe diagnostic indicators on the system front panel display error status during system startup.NOTE: The diagnostic indicators are not present if the system is equipped with an LCD display.NOTE: The diagnostic indicators are present only on the 10-hard drive and the 24–hard drivesystems.NOTE: No diagnostic indicators are lit when the system is switched off. To start the system, plug itinto a working power source and press the power button.15
