Next steps1. Follow the procedure listed in After working inside your system.2. Install any device drivers required for the card as described in the documentation for the card.SD vFlash media cardA vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. Itprovides persistent on-demand local storage and a custom deployment environment that allowsautomation of server configuration, scripts, and imaging. It emulates USB device(s). For more information,see the Integrated Dell Remote Access Controller User’s Guide at dell.com/esmmanuals.Replacing a SD vFlash cardPrerequisitesNOTE: This procedure applies only to the 8-hard drive system.Steps1. Locate the vFlash media slot on the system.2. To remove the installed SD vFlash card, push inward on the card to release it and pull the card fromthe card slot.Figure 34. Removing and installing the SD vFlash card1. SD vFlash card 2. SD vFlash card slot3. To install the SD vFlash card, with the label side facing up, insert the contact-pin end of the SD cardinto the card slot on the module.NOTE: The slot is keyed to ensure correct insertion of the card.4. Press inward on the card to lock it into the slot.Internal dual SD moduleNOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of theSystem Setup, the information is replicated from one SD card to another.85
