About System SetupUsing System Setup, you can configure the BIOS settings, iDRAC settings, and device settings of yoursystem.You can access System Setup in two ways:• Standard Graphical Browser— This is enabled by default.• Text Browser— This is enabled using Console Redirection.NOTE: By default, help text for the selected field is displayed in the graphical browser. To view thehelp text in the text browser, press .Entering System Setup1. Turn on or restart your system.2. Press immediately after you see the following message: = System SetupIf your operating system begins to load before you press , allow the system to finish booting,and then restart your system and try again.System Setup Main MenuOption DescriptionSystem BIOS Enables you to configure BIOS settings.iDRAC Settings Enables you to configure iDRAC settings.The iDRAC Settings utility is an interface to set up and configure the iDRACparameters using UEFI. You can enable or disable various iDRAC parameters byusing the iDRAC Settings utility. For more information about this utility, see theIntegrated Dell Remote Access Controller User’s Guide at dell.com/esmmanuals.Device Settings Enables you to configure device settings.System BIOS screenYou can use the System BIOS screen to view BIOS settings as well as edit specific functions such as bootorder, system password, setup password, setting RAID mode, and enabling or disabling USB ports.In the System Setup Main Menu, click System BIOS.The System BIOS screen details are explained below.ExampleMenu Item DescriptionSystemInformationDisplays information about the system such as the system model name, BIOSversion, Service Tag, and so on.Memory Settings Displays information and options related to installed memory.32
