Menu Item DescriptionContactInformationSystem CPLDVersionDisplays the current revision of the system CPLD firmware.UEFI ComplianceVersionDisplays the system firmware UEFI compliance level.Memory Settings screen detailsYou can use the Memory Settings screen to view all the memory settings as well as to enable or disablespecific memory functions such as system memory testing and node interleaving.You can view the Memory Setting screen by clicking System Setup Main Menu → System BIOS →Memory Settings.The Memory Settings screen details are explained as follows:ExampleMenu Item DescriptionSystem MemorySizeDisplays the amount of memory installed in the system.System MemoryTypeDisplays the type of memory installed in the system.System MemorySpeedDisplays the system memory speed.System MemoryVoltageDisplays the system memory voltage.Video Memory Displays the amount of video memory.System MemoryTestingSpecifies whether system memory tests are run during system boot. Options areEnabled and Disabled. By default, the System Memory Testing option is set toDisabled.MemoryOperating ModeSpecifies the memory operating mode. The options available are Optimizer Mode,Advanced ECC Mode, Mirror Mode, Spare Mode, Spare with Advanced ECC Mode,and Dell Fault Resilient Mode. By default, the Memory Operating Mode option isset to Optimizer Mode.NOTE: The Memory Operating Mode can have different defaults and availableoptions based on the memory configuration of your system.NOTE: The Dell Fault Resilient Mode establishes an area of memory that isfault resilient. This mode can be used by an operating system that supports thefeature to load critical applications or enables the operating system kernel tomaximize system availability.Node Interleaving Specifies if Non-Uniform Memory architecture (NUMA) is supported. If this field isEnabled, memory interleaving is supported if a symmetric memory configuration is34
