Figure 95. Removing and installing the information tag1. information tag 2. tab3. slotNext steps1. Replace the control panel. See Installing the control panel (R730).2. Follow the procedure listed in After working inside your system.Installing the control panel (R730)Prerequisites1. Ensure that you read the Safety instructions.2. Keep the #2 Phillips screwdriver handy.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.Steps1. Replace the blank information tag in the new control panel with the information tag retained fromthe old control panel.NOTE: Information tag lists system information such as Service Tag, NIC, MAC address, and soon.2. To install the information tag, push the information tag into the control-panel slot.3. Connect all the applicable cables to the control panel.4. Slide the control panel into the slot in the chassis and secure the module with the screw.Next stepsFollow the procedure listed in After working inside your system.174
