Menu Item Descriptionlist is attempted to boot. When set to Enabled, all hard disk devices are attemptedin order, as listed in the Hard-Disk Drive Sequence. This option is not enabled forUEFI Boot Mode.Boot OptionsSettingsConfigures the boot sequence and the boot devices.Network Settings screen detailsYou can use the Network Settings screen to modify PXE device settings. Network Settings are onlyavailable in UEFI boot mode. BIOS does not control network settings in the BIOS boot mode. For BIOSboot mode, the network settings are handled by the network controllers option ROM.You can view the Network Settings screen by clicking System Setup Main Menu → System BIOS →Network Settings.The Network Settings screen details are explained as follows:ExampleMenu Item DescriptionPXE Device n (n =1 to 4)Enables or disables the device. When enabled, a UEFI boot option is created for thedevice.PXE Device nSettings (n = 1 to4)Allows you to control the configuration of the PXE device.Integrated Devices screen detailsYou can use the Integrated Devices screen to view and configure the settings of all integrated devicesincluding the video controller, integrated RAID controller, and the USB ports.You can view the Integrated Devices screen by clicking System Setup Main Menu → System BIOS →Integrated Devices.The Integrated Devices screen details are explained below.ExampleMenu Item DescriptionUSB 3.0 Setting Enables or disables the USB 3.0 support. Enable this option only if your operatingsystem supports USB 3.0. If you disable this option, devices operate at USB 2.0speed. USB 3.0 is disabled by default.User AccessibleUSB PortsEnables or disables the USB ports. Selecting Only Back Ports On disables the frontUSB ports, selecting All Ports Off disables all USB ports. The USB keyboard andmouse operates during boot process in certain operating systems. After the bootprocess is complete, the USB keyboard and mouse do not work if the ports aredisabled.NOTE: Selecting Only Back Ports On and All Ports Off will disable the USBmanagement port and also restrict access to iDRAC features.Internal USB Port Enables or disables the internal USB port. By default, the option is set to Enabled.43
