Configuring and Managing RAID 113After you enable the BIOS for a controller, perform the following steps toenable the boot support for that controller:1 Press to access the Ctrl Mgmt menu screen.2 Press to move the cursor to the Select Bootable VD in theSettings box.3 Press the down-arrow key to display a list of virtual disks.4 Use the down-arrow key to highlight a virtual disk.5 Press to select the virtual disk.6 Press to move the cursor to the Apply button, and then press to apply the selection.Boot support is enabled for the selected controller.Enabling BIOS Stop on ErrorThe option BIOS Stop on Error is used to stop the system from booting if thereare BIOS errors. Perform the following steps to enable BIOS Stop on Error.1 Press to access the Ctrl Mgmt menu screen.2 Press to move the cursor to Enable BIOS Stop on Error in theSettings box.3 Press the spacebar to select Enable BIOS Stop on Error.An X is displayed beside Enable BIOS Stop on Error.4 Press to move the cursor to the Apply button, and then press to apply the selection.The controller BIOS is enabled. To disable Enable BIOS Stop on Error,use the spacebar to de-select Enable BIOS Stop on Error, then selectApply and press .Enabling Auto ImportIf there is a native configuration present on the controller, the option EnableAuto Import automatically imports every online foreign configuration duringboot without having the need to access the BIOS Configuration Utility.NOTE: The controller automatically imports every optimal and degradedforeign configuration without enabling the feature if there is no nativeconfiguration on the controller.
