76 Driver InstallationCreating a Driver Update Diskette Using DKMSPerform the following steps to create the Driver Update Diskette (DUD)using the DKMS tool:NOTE: The driver must be installed on the system where this procedure is performed.1 Install the DKMS-enabled megaraid_sas driver rpm package.2 Type the following command in any directory:dkms mkdriverdisk –m megaraid_sas –v version> -k -d NOTE: The values for the –d option are suse for Suse Linux EnterpriseServer diskettes and redhat for RHEL diskettes.NOTE: For more information on usage of DKMS, see the DKMS main page.This starts the process to create the megaraid_sas DUD image. After theDUD image has been built, you can find it in the DKMS tree for themegaraid_sas driver. See the output of the dkms mkdriverdiskcommand for the exact path.Installing Red Hat Enterprise Linux Operating System Using the DUDPerform the following steps to install Red Hat Enterprise Linux (versions 4and 5) and the appropriate driver:1 Boot normally from the Red Hat Enterprise Linux installation media.2 At the command prompt, type: linux expert dd3 When the install prompts for additional drivers, insert the disketteor USB key and press .For information about creating a driver diskette, see "Creating a DUD" onpage 74.4 Complete the installation as directed by the installation program.
