Installing System Components 1316 Press down and out on the ejectors on each end of the socket until thememory module pops out of the socket. See Figure 3-20.CAUTION: Handle each memory module only by the card edges, ensuring not totouch the components on the module.7 Replace any removed memory modules with memory-module blanks toensure proper system cooling. See "Installing Memory Modules" forinstallation instructions.8 Install the cooling shroud. See "Installing the Cooling Shroud."9 Install the expansion card stabilizer. See "Installing the Expansion CardStabilizer."10 Close the system. See "Closing the System."11 Place the system upright and on its feet on a flat, stable surface.12 Reattach any peripherals, then connect the system to the electrical outlet.13 Turn on the system and attached peripherals.ProcessorsRemoving a ProcessorCAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is not coveredby your warranty. Read and follow the safety instructions that came with theproduct.1 Prior to upgrading your system, download the latest system BIOS versionfrom support.dell.com and follow the instructions included in thecompressed download file to install the update on your system.2 Turn off the system, including any attached peripherals, and disconnectthe system from the electrical outlet and peripherals.3 Open the system. See "Opening the System."4 Remove the expansion card stabilizer. See "Removing the Expansion CardStabilizer."5 Remove the cooling shroud. See "Removing the Cooling Shroud."
