Troubleshooting Your System 16526 Place the system upright and on its feet on a flat and stable surface,reconnect the system to the electrical outlet, and turn on the system andattached peripherals.27 As the system boots, observe any error message or LCD message thatappears.28 If the memory problem is still indicated, repeat step 17 through step 27 foreach memory module installed.If the problem persists after all memory modules have been checked, see"Getting Help."Troubleshooting an Internal SD CardCAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is not coveredby your warranty. Read and follow the safety instructions that came with theproduct.1 Enter the System Setup program and ensure that the internal SD card portis enabled. See "Integrated Devices Screen."2 Turn off the system and attached peripherals, and disconnect the systemffrom the electrical outlet.3 Open the system. See "Opening the System."4 Reseat the internal SD module cable. See “Installing the Internal SDModule.”5 Locate the SD card and reseat it. See "Removing an Internal SD FlashCard" and "Installing an Internal SD Flash Card."6 Close the system. See "Closing the System."7 Place the system upright and on its feet on a flat and stable surface,reconnect the system to the electrical outlet, turn on the system andattached peripherals, and check if the SD card is functioning.8 If the problem is not resolved, repeat step 2 and step 3.9 Insert a different SD card that you know works properly.10 Close the system. See "Closing the System."
