4. If applicable, remove the cooling fan assembly.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.Steps1. Remove the screw that secures control panel to the chassis.2. Disconnect the control panel cable and the control panel USB cable from the system board.CAUTION: Do not use excessive force when removing the control panel cables as it candamage the connectors.3. Slide the control panel out of the chassis.NOTE: Follow the same steps to remove the control panel in the rack-mode configuration.Figure 106. Removing the control panel assembly1. control panel 2. control panel cable3. control panel USB cable 4. screw4. To remove the information tag, perform the following steps:a. Locate and press the tabs on the information tag.b. Push the information tag out of the slot to remove it from the control panel.NOTE: Retain the information tag to replace it in the new control panel.187
