If you do not enter the correct password in three attempts, the system displays the messageInvalid Password! Number of unsuccessful password attempts: System Halted!Must power down.Even after you shut down and restart the system, the error message is displayed until the correct password is entered.The following options are exceptions:• If System Password is not Enabled and is not locked through the Password Status option, you can assign asystem password.• You cannot disable or change an existing system password.NOTE: You can use the Password Status option in conjunction with the Setup Password option to protect thesystem password from unauthorized changes.Embedded System ManagementThe Dell Lifecycle Controller provides advanced embedded systems management throughout the server’s lifecycle. TheLifecycle Controller can be started during the boot sequence and can function independently of the operating system.NOTE: Certain platform configurations may not support the full set of features provided by the Lifecycle Controller.For more information about setting up the Lifecycle Controller, configuring hardware and firmware, and deploying theoperating system, see the Lifecycle Controller documentation at support.dell.com/manuals.28
