Firmware Downloads 1037 A Confirm Download dialog box appears listing the current versions andthe versions you selected of physical disk firmware. To complete thedownload, click Yes.Downloading EMM FirmwareNOTICE: Do not make any configuration changes to the storage array while you aredownloading the EMM firmware. Doing so could cause the firmware download tofail, damage the storage array, or cause loss of data accessibility.NOTE: Due to a limitation with Linux, EMM firmware updates must be performedusing out-of-band management only. Failure to do so may result in the host serverbecoming unresponsive, and it may require a reboot.1 Click the Support tab, then click Download firmware.2 From the Download firmware display, click Download Environmental(EMM) Card Firmware.A list of expansion enclosures appears with the corresponding version ofthe current EMM firmware file.3 Select where to download the EMM firmware by clicking an individualexpansion enclosure to highlight it or by clicking the Select All checkboxto highlight all the expansion trays.4 Click Select File to locate the directory in which the EMM firmware file todownload resides. Select the file to download by double-clicking the file, andthen click Start to start the download.The Start button is disabled until you select a firmware file. If you click Stopwhile a firmware download is in progress, the download completes before theoperation stops. When the status field for the remaining expansionenclosures changes to Canceled, restart the firmware upgrade process.Firmware Upgrade to 07.xxNOTE: All I/O to the array should be stopped before performing the upgrade.NOTE: Due to the nature of the enhancements made by the 07.xx firmware, oncethe upgrade to the 07.xx firmware is made, Dell does not support converting back tothe 06.xx firmware.
