36 Using iSCSINOTE: Changing any of these settings resets the iSCSI port. I/O is interrupted toany host accessing that port. You can access the I/O automatically after the portrestarts and the host logs in again.Viewing or Ending an iSCSI Session1 Click the iSCSI tab, and then click View/End iSCSI Sessions.2 Select the session you want to view in the Current sessions box. Thedetails are shown below in the Details box.3 If you want to end the session, perform the following steps:a Select the session that you want to end, and then click End Session toshow the End Session confirmation window.Ethernet Priority The network priority can be set from lowest to highest.Although network managers must determine thesemappings, the IEEE has made broad recommendations:• 0 — lowest priority (default)• 1-4 — ranges from "loss eligible" traffic to controlled-loadapplications, such as streaming multimedia and business-critical traffic• 5-6 — delay-sensitive applications such as interactivevideo and voice• 7 — highest priority reserved for network-critical traffic(do not use with the MD3000i)TCP Listening Port The default Transmission Control Protocol (TCP)listening port is 3260.Jumbo Frames The maximum transmission units (MTUs). It can be setbetween 1500 and 9000 bytes per frame. If the JumboFrames are disabled, the default MTU is 1500 bytes perframe.Table 3-2. Advanced iSCSI Host Port Settings(continued)Setting Description
