Using iSCSI 37b In the confirmation window, type yes to confirm that you want to endthe iSCSI session, and then click OK.NOTE: If you end a session, any corresponding connections terminate the linkbetween the host and the storage array, and the data on the storage array isno longer available.NOTE: When a session is manually terminated using the MD StorageManager, the iSCSI initiator software will automatically attempt to re-establish the terminated connection to the storage array. This may cause anerror message.4 Click Save As to save the entire iSCSI sessions topology as a text file.Viewing iSCSI Statistics and Setting BaselineStatisticsIf the configured storage array has iSCSI technology, the View iSCSIStatistics option is available only on the iSCSI tab.1 Click the iSCSI tab, and then click View iSCSI Statistics.2 Select the iSCSI statistic type you want to view. Select one of these types:• Ethernet MAC statistics• Ethernet TCP/IP statistics• Target (protocol) statistics3 Choose either Raw statistics or the Baseline statistics.Raw statistics are all the statistics that have been gathered since thecontrollers were started. Baseline statistics are point-in-time statistics thathave been gathered since you set the baseline time.After you select the statistics type and either raw or baseline statistics, thedetails of the statistics appear in the statistics tables.4 To set the baseline for the statistics, complete the following steps:a Select Baseline Statistics.b Click Set Baseline.
