Troubleshooting: Your Storage Array Software 2454 When you have located the physical disks, click OK.The LEDs stop blinking. If any other blink operations (Blink Disk Group,Blink Storage Array, Blink Physical Disk Ports, or Blink ExpansionEnclosure) are currently being invoked from another storage managementstation, these LEDs also stop blinking.5 In the rare case that the LEDs on the physical disks do not stop blinking,in the AMW, select Storage Array Blink Stop All Indications.If the LEDs successfully stop blinking, a confirmation message isdisplayed.6 Click OK.Locating an Expansion EnclosureYou can use the Blink option to physically locate and identify an expansionenclosure in the storage array.The LED activation varies according to the type of expansion enclosure thatyou have.• If you have an expansion enclosure with a white LED, the Blink ExpansionEnclosure operation causes the white LED on the expansion enclosure tocome on. The LED does not blink.• If you have any other types of expansion enclosures, this operation causesthe appropriate LED on all of the physical disks in the expansion enclosureto blink.To locate the expansion enclosure:1 Select the Physical tab.2 Select a physical disk in the expansion enclosure that you want to locate.3 Select Physical Disk Blink Expansion Enclosure.The LED or LEDs on the expansion enclosure or physical disks come on.4 When you have located the expansion enclosure, click OK.The LEDs stop blinking. (If you have an expansion enclosure with a blueLED, the LED goes off). If any other blink operations (Blink Storage Array,Blink Disk Group, Blink Physical Disk Ports, Blink Expansion Enclosure, or
