36 Setting Up Your PowerVault NX3500 SolutionCompleting the NAS System Setup WorksheetThe NAS System Setup Worksheet appended at the end of this documentwill assist you in the overall setup and configuration of your solution. See"NAS Setup Worksheet" on page 197.NOTE: It is recommended that you take a print out of the worksheet attached in theend of this document. This will assist you in the overall setup and configuration ofyour solution.Preparing Your Management StationA management station is required to manage and configure the PowerVaultNX3500. The solution can be accessed using either the CLI or the NASManager.NOTE: Only one login at a time is allowed for both the CLI and the NAS Manager.Ensure that you are not logged on to both the CLI or the NAS Manager at the sametime or attempt multiple logins.The minimum requirements for the management station are:• It must have IPv6 enabled.• The PowerVault NAS configuration utility is installed.NOTE: You can install Dell PowerVault NAS Configuration Utility from theDellResource Media Dell Scalable File System (DSFS) DVD that shipped with yoursolution.• The PowerVault NX3500 is cabled appropriately, and the managementstation is on the same network as the LAN/client network.• Has either Internet Explorer or Firefox installed with Java Script enabled.Preparing Your MD Storage SolutionThis section assumes you have discovered and completed the initialconfiguration (naming, assigning iSCSI, and management port IPs) of yourPowerVault MD3xx0i storage arrays in accordance with the topology you planto use.
