70 Monitoring PowerVault NX3500The graphs display the combined actual throughput, excluding overhead(read and write) for each of the selected controllers.Client ConnectionsThe Client Connections page enables the following:• Display the distribution of clients between controllers.• Manually migrate specific clients from one controller to another.• Set the policy for automatic client migration.To display the Clients Connections page, choose MonitorLoadBalancingClient Connections.Table 4-8. Client Connections PageField DescriptionClient/Router IP The IP address of the client or router that accesses the system.Access using IP The IP address used to access the system.Assigned interface The controller and network interface which were allocated forthis client/router (either automatically by the system ormanually by an administrator).Current interface The controller and network interface currently assigned tothis client or router. The current interface can be differentfrom the assigned interface after automatic connection fail-over. Depending on the Migration Policy, a connection thatwas migrated from its assigned controller to anothercontroller, can remain on that controller. In such event, thecurrent interface is different from the assigned interface.Protocol The protocol that the client connection uses: CIFS, NFS, orOther. PowerVault NX3500 identifies the clients accessingwith a recognized protocol, CIFS, or NFS and displays theactual protocol. For other local clients, for example, routers,the system displays the value 'Other' as the protocol.
