54 Setting Up Your PowerVault NX3500 Solution4 Open StartHere.htm.5 Follow the prompts in the installer to complete the installation.For Linux-based admin stations:Graphical Installation1 Insert the PowerVault NX3500 Resource Media into the optical drive.2 Point the file-system explorer to the mounted optical drive.3 Run StartHere.htm.This launches an internet browser.4 Follow the prompts in the installer to complete the installation.Command-Line Installation1 Insert the PowerVault NX3500 Resource Media into the optical drive.2 Open a terminal window and change directories (cd) to the optical drive(For example, cd /media/disk/media/cdrom).3 Change directories to the InstData folder.4 Identify the build of operating system being used (32-bit or 64-bit) andchange directory into either the Linux_amd64/VM/ (64-bit) orLinux_i386/VM/ (32-bit) folder.5 Run the installer located in this folder by calling sh ./pv-nas-config-utility-installer-linux-.bin.6 Follow the steps in the installer to complete the installation.Launching the PowerVault NASCUFor Windows-based operating systems:1 Access the Windows desktop and double-click the PowerVault NX3500Configuration Utility icon, or access the Windows start menu andnavigate to All ProgramsDellPowerVault NAS.2 Click on PowerVault NX3500 Configuration Utility.For Linux-based operating systems:1 Execute the PowerVault NASCU from a terminal prompt.2 Ensure that the currently logged-on terminal user is root.
