S olv ing Pr oble m s 149NOTE: If you do not have a spare jumper, you can use the PSWD jumper.However, ensure that you install the PSWD jumper back on the PSWDpins before you turn on the computer.4 Replace the computer cover.5 Reconnect the computer and peripherals to their electrical outlets,and turn them on.6 Enter system setup and change the configuration informationappropriate for your computer.After you change the system settings, exit system setup and reboot thecomputer.Is the computer working properly?Yes. The problem is resolved.No. Contact Dell for technical assistance.NOTE: After you reset the computer using the RTCRST jumper, you mustenter system setup and restore any option settings that were not in your defaultconfiguration.Dell DiagnosticsWhen to Use the Dell DiagnosticsIf you experience a problem with your computer, run the Dell Diagnosticsbefore you call Dell for technical assistance. The Dell Diagnostics testscheck your computer's hardware without additional equipment and withoutthe risk of destroying data. When the diagnostics tests complete withoutindicating any problems, you can have confidence in your computer'soperation. If the tests indicate a problem you cannot solve by yourself, thetest results provide important information you will need when talking toDell's service and support personnel.NOTICE: Only use the Dell Diagnostics to test your Dell computer. Using thisprogram with other computers may cause incorrect computer responses orresult in error messages.FeaturesThe diagnostic test groups features allow you to take the following actions:
