3. Slide the hard drive out of the computer.4. Remove the new drive from its packaging.Save the original packaging for storing or shipping the hard drive.5. Slide the hard drive into the bay until it is fully seated.6. Replace and tighten the screws.7. Use the Operating System media to install the operating system for your computer (see Using the Operating System Media).8. Use the Drivers and Utilities media to install the drivers and utilities for your computer (see Reinstalling Drivers and Utilities).Media BayRemoving Media Bay Devices1. If present, remove the device locking screw from the bottom of the computer.2. If the computer is running, double-click the Safely Remove Hardware icon on the taskbar, click the device you want to eject, and click Stop.3. Press the device latch release.4. Pull the device out of the media bay.To install a device, push the new device into the bay until it clicks into place.FCM (Flash Cache Module)The FCM, or Flash Cache Module, is an internal flash drive that helps improve the performance of your computer.NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.NOTE: If the device locking screw is not present, you can remove and install devices while the computer is running and connected to a docking device(docked).NOTICE: To prevent damage to devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them orplacing heavy objects on top of them.1 optical drive 2 device latch releaseNOTE: This card is only compatible with the Microsoft Windows Vista® operating system.NOTE: If you ordered an FCM card with your computer, the card is already installed.
