Dell Precision M90 Service Manual

Also see for Precision M90: Quick reference guide Quick reference guide User guide User guide

7. Remove the four M2.5 x 5-mm screws (two on each side) that connect the display to the computer base.8. Lift the display assembly away from the computer.Replacing the Display Assembly1. Thread the Mini-Card antenna cables back through the hole in the base of the computer so that they are accessible from the bottom of the computer.1 display cable pull-tab 2 M2.5 x 5-mm screws (4) 3 Mini-Card antennacables (2)4 display cable connector onsystem board5 display cable in cablechannel1 Mini-Card antenna cablesNOTE: When removing the display assembly, carefully unthread the Mini-Card antenna cables through the computer base and ensure that the plasticprotectors—if present—remain on the individual cables.