Dell Precision M90 Service Manual

Also see for Precision M90: Quick reference guide Quick reference guide User guide User guide

Back to Contents PageSpeakersDell Precision™ M90 Mobile Workstation Service ManualRemoving the SpeakersReplacing the SpeakersRemoving the Speakers1. Follow the instructions in Before Working Inside Your Computer.2. Remove the hinge cover (see Removing the Hinge Cover).3. Remove the display assembly (see Removing the Display Assembly).4. Remove the keyboard (see Keyboard).5. Remove the palm rest (see Removing the Palm Rest).6. Disconnect the speaker cable connector from the connector on the system board.7. Lift the tape that secures the speaker cables to the computer base, and disengage the cables from the cable guides.8. Remove the four M2.5 x 5-mm screws from the speakers (two on each speaker).9. Remove the speakers.Replacing the Speakers1. Connect the speaker cable connector to the connector on the system board.2. Align the speakers on the screw holes for securing the speakers to the computer base.3. Replace the four M2.5 x 5-mm screws to secure the speakers in place (two on each speaker).4. Re-route the speaker cables into the cable guides, and re-adhere the tape to secure the speaker cables in place on the computer base.CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (suchas the back panel) on the computer.NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside thecomputer.NOTICE: Handle the speakers with care to help prevent damage to them.1 M2.5 x 5-mm screws (4) 2 cable guides 3 tape4 speakers (2) 5 speaker cable 6 connector on system board