Dell Precision M90 Service Manual

Also see for Precision M90: Quick reference guide Quick reference guide User guide User guide

1. Reconnect the top display-cable connector to the top flex-cable connector.2. Reconnect the bottom flex-cable connector to the inverter connector.3. Replace the display panel inside the display back cover.4. Tighten the captive screw that attaches the display-panel ground wire to the display back cover.5. Replace the eight M2 x 3-mm screws (four on each side) around the display panel.6. Replace the display bezel (see Replacing the Display Bezel).Display LatchRemoving the Display Latch1. Follow the instructions in Before Working Inside Your Computer.2. Remove the display assembly (see Removing the Display Assembly).3. Remove the display bezel (see Removing the Display Bezel).4. Slide the latch to the right and gently lift.5. Remove the spring that attaches the latch to the display panel.Replacing the Display Latch1. Replace the spring that attaches the latch to the display panel.2. Align the latch with the display panel and slide the latch to the left to secure it into place.Back to Contents PageCAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.1 spring 2 display latch