TERA1x00 PC-over-IP Administrative Interface User Manual TER0606004 Issue 3© 2008 Teradici Corporation Page 44 of 111Below the Connection State field there are two buttons; Connect andDisconnect.ConnectIf the Connection State is Disconnected, selecting this button causes the Portal toinitiate a PC-over-IP session with its peer device. If the Connection State isConnection Pending or Connected, this button is disabled.This option is only available on a Portal; on the Host it is disabled and non-editable.DisconnectIf the Connection State is Connected or Connection Pending, selecting thisbutton causes the device to end the PC-over-IP session. If the Connection State isDisconnected, this button is disabled.1.7.2.2 Peer IP/MAC AddressPeer IP AddressThe Peer IP Address reports the IP address of the peer device. When not insession, the field is blank.Peer MAC AddressThe Peer MAC Address displays the MAC address of the peer currently in session.When not in session, the field is blank.1.7.3 Session StatisticsThe Session Statistics webpage allows viewing of PC-over-IP specific statistics.Note: A subset of Session Statistics can also be viewed using the Portal OSD. SeeSection 2.4.2 Session Statistics.
