TERA1x00 PC-over-IP Administrative Interface User Manual TER0606004 Issue 3© 2008 Teradici Corporation Page 82 of 1114 Appendix A: Usage Examples4.1 Peer-to-Peer Direct Connection ExampleThis example overviews configuring the Portal and Host for a direction connection,i.e. without the use of a Connection Management Server or the Enable HostDiscover option.The following IP and MAC addresses are used for this example:• Portal: IP Address: 192.168.0.34, MAC: 6C-EC-6F-D2-19-00• Host: IP Address: 192.168.0.20, MAC: 00-19-D2-6F-EC-6CNote: For a Peer-to-Peer direct connection, it is required to know the IP and MACaddresses of the Portal and Host.4.1.1 Portal Peer-to-Peer ConfigurationNote: Although this example uses the Administration Web Interface for configuringthe Portal for peer-to-peer operation, the Portal OSD may also be used to configurethe Portal. See Section 2 On Screen Display (OSD) for matching OSD functionality.Configure the Portal for peer-to-peer direct connection:1. Open the Portal Administration Web Interface by using an internet browser toopen the Portal IP address, e.g. https://192.168.0.342. Log in to the Portal Administration Web Interface3. Select the Connection Management webpage from the Configuration menu