TERA1x00 PC-over-IP Administrative Interface User Manual TER0606004 Issue 3© 2008 Teradici Corporation Page 71 of 111Figure 49: Reset2.3.9.1 Reset ParametersThe Reset Parameters Reset button resets all configuration and permissions tofactory default values. When this button is selected, the OSD will prompt theadministrator for confirmation to prevent accidental resets.2.4 DiagnosticsThe Diagnostics window allows the administrator to access the window tabs withdiagnostics concerning the Portal. The tabs in the Diagnostics window are:• Event Log• Session Statistics• PCoIP Processor• PingEach tab has an associated Close button to close the window.2.4.1 Event LogThe Event Log tab allows viewing and clearing of event log messages from thePortal.Note: The Event Log (terse or verbose) can also be initiated using the WebpageAdministration Interface. See Section 1.7.1 Event Log.