TERA1x00 PC-over-IP Administrative Interface User Manual TER0606004 Issue 3© 2008 Teradici Corporation Page 97 of 1113. Select the Bandwidth webpage from the Configuration menuFigure 78: Host Bandwidth Limit Configuration (25 Mbps)4. Enter 25 in the Device Bandwidth Limited field5. Enter 20 in the Device Bandwidth Target field6. Select the Apply button to accept the changes7. Repeat for the other three user HostsThe bandwidth is now limited to 25 Mbps and targeted to 20 Mbps for each user.Figure 79 shows simplified bandwidth usage with the limit for each user nowconfigured for 25 Mbps. Here it can be seen that all users are limited to 25 Mbpsand do not have access to more bandwidth when required. It can be seen that evenwhen the usage is totaled, the total switch bandwidth (100 Mbps) is never fully used.Also note that since there is no congestion, there is no requirement to reduce thebandwidth to the targeted 20 Mbps or lower.
