112xxx | LDAP Feature for the RCSxxxConfiguring the Network Time Protocol(NTP) SettingsThe switch must have access to the current time to verify that certificates havenot expired. You can configure the switch to request time updates from theNTP. To configure NTP settings in the on-board web interface:1 Click NTP to open the NTP screen.2 Click the Enable NTP box.3 Enter the name of your network time source in the provided boxes. Youmay also set an hour interval to specify how often to request time updates.If the interval is set to 0, requests will only be made during RCS startup orwhen changes to the Global - NTP menu are made.4 Click Save.Configuring the LDAP AuthenticationParametersThe Authentication panel allows RCS Administrators to configure theparameters required to access LDAP Directory Services. When access requestsare received from users, the RCS can use LDAP protocols to send the username,password, and other information to the Directory Service in determining whatauthorization permissions the user has.NOTE: The terms for establishing LDAP configuration are, KVM User, KVMUser Admin, and KVM Appliance Admin, They are equivalent to User, UserAdministrator and RCS Administrator, respectively. The access levels havenot changed, but use the new terms as directed.Enabling LDAP AuthenticationThe Operational Modes section on the LDAP Configuration Options screenallows you to choose the appropriate type of LDAP services to use for user
