84xxx | The Video Viewer Windowxxx-or-Click the Session Options button.The Session Options dialog box appears.2 Click the Toolbar tab.3 Use the arrow keys to specify the number of elapsed seconds prior to hidingthe toolbar.4 Click OK to save your changes and close the dialog box.Launching a SessionNOTE: When using a non-proxied connection, video performance over aslower network connection may be less than optimal. Since certain colorsettings (such as Grayscale) use less network bandwidth than others (suchas Best Color), changing the color settings can increase video performance.For optimal video performance over a slower network connection, use a colorsetting such as Grayscale/Best Compression or Low Color/HighCompression. See "Adjusting the View" on page 85 for more information.NOTE: If a user connects to a target device with a higher screen resolutionthan the local computer, the Video Viewer window will display a portion of thetarget device screen, with scroll bars for viewing the remainder of the screen.The user may view the entire screen by adjusting the resolution on the targetdevice, the local computer or both.To launch a KVM session from the switch Explorer window:1 Click on a device listed on the Target List screen to open the unit overviewwindow.2 Click the KVM Session link to open the Video Viewer in a new window.Session Time-outA remote session can time-out when no activity occurs in a Session window fora specified time. The session time-out value can be configured in the RCS KVMSession Settings window. The specified time-out value will be used the nexttime the switch OBWI is accessed.
