3D F ORMAT —Allows you to select the 3D format. Options are: Side By Side,Side By Side Full, Frame Sequential, Field Sequential, Top/Bottom, andTop/Bottom Full.3D S YNC I NVERT —If you see a discrete or overlapping image whilewearing DLP 3D goggles, you may need to execute 'Invert' to get bestmatch of left/right image sequence to get the correct image. (For DLP3D goggles)D ISPLAY SETTINGS (IN VIDEO M ODE )—Select and press to activate display settings.The display settings menu provides the following options:A SPECT RATIO—Allows you to select the aspect ratio to adjust how the imageappears. Options are: Origin, 16:9, and 4:3.•Origin — Select Origin to maintain the aspect ratio of image projectoraccording to the input source.•16:9 — The input source scales to fit the width of the screen to project a16:9 screen image.•4:3 — The input source scales to fit the screen and projects a 4:3 image.ZOOM —Press and to zoom and view the image.Adjust the image scale by pressing orand press to view on your remote controlonly.Z OOM NAVIGATION —Press to activate the ZoomNavigation menu.Use to navigate the projection screen.3D D ISPLAY —Select On to start the 3D display function (default is Off).NOTE:1. When you want to create a 3D experience, you will need a few othercomponents including:Using Your Projector 59Downloaded From projector-manual.com DELL Manuals
