Enable Wireless or LAN on the Projector1 Install the optional wireless module kit (optional in S320). See "Installing theOptional Wireless Module Kit" on page 14.NOTE: If you select install the LAN module kit (optional), see "Installing theOptional RJ45 Kit" on page 16.2 Connect the power cable and turn on the projector by pressing the powerbutton.NOTE:a If the LAN is used for audio projection, follow these steps to enable Wirelessand LAN function (default is Enabled): Advanced Settings LAN SettingsWireless and LAN Enabled.b If the Wireless is used for audio projector, please install a wireless dongle toyour projector.3 Access the Input Source menu, select the Wireless/USB and then select theWireless Display on the sub-menu.Using Your Projector 91Downloaded From projector-manual.com DELL Manuals
