14 Setting Upw w w . d e l l . c o m | s u p p o r t . d e l l . c o mSee the documentation that came with the printer for any recommendedpreparation procedures, such as:• Removing the packaging• Installing the toner or ink cartridge• Loading paperThen follow the instructions that came with the printer to connect it to thecomputer. If no information is provided, see the following sections.Parallel PrinterFollow the instructions that came with the parallel printer to connect it tothe computer. If no information is provided, then follow the instructions inthis section.1 Turn off the computer (see page 18).NOTICE: Use only a standard IEEE parallel cable measuring 3 m (10 ft) orless to connect the printer to the computer. Use of a nonstandard cable mayprevent the printer from working.2 Attach the parallel printer cable to the parallel connector on thecomputer and tighten the two screws. Attach the cable to the parallelconnector on the printer and snap the two clips into the two notches.
