70 Adding Partsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m 7 To insert a module, press out the securing clip at each end of thememory connector.8 Align the notches on the bottom of the module with the crossbars inthe connector.NOTICE: To avoid breaking the memory module, do not press near the middleof the module.9 Insert the module straight down into the connector, making sure thatit fits into the vertical guides at each end of the connector.Press firmly on the ends of the module until it snaps into place.If you insert the module correctly, the securing clips snap into thecutouts at each end of the module.securing clips (2)notches (2)step 7memory modulecutouts (2)connectorstep 8step 9memory connectorson system board
