Dell TrueMobile 2300 User Manual

Also see for TrueMobile 2300: Specifications Faq

4. Click Add to enter the rule to the router.5. To remove an existing rule, check the "Del" checkbox next to the MAC address and click the DEL button.6. Click the SUBMIT button to store the changes.Back to TopPort Forwarding SettingsDMZDMZ (demilitarized zone) feature allows access to all ports. (For example, if you have problems hosting a game server, youcan choose this option. This will open all ports to your game server.)1. Check the Enable DMZ Host box.2. Type the IP address of the computer that you want to run the gaming application in the DMZ IP Address field.3. Click SUBMIT button to activate the setting.NOTE: Configuring the Wireless Broadband Router in DMZ mode is useful if you want to play certain games throughthe Wireless Broadband Router, but the ports cannot be opened with all other existing configuration tools.NOTICE: Opening a service to the Internet causes security concerns. Pay careful attention to security alerts,and make sure that strong access controls and authentication are in place before allowing access to anyservices.Custom Port Forwarding SettingsPort Forwarding may be more difficult than DMZ to configure. However, it provides a relatively safe way of running a Internetapplication or providing a Internet service from behind a firewall since only a single port (or a range of ports) is exposed to theInternet. You can configure this port forwarding setting to create a custom rule that defines a specific port and protocol for datatraffic to pass through to the specific computer on your LAN.An example is a HTTP server running on your LAN, which you want it to be available to the Internet. Your public IP address(that your ISP gives you) is X.X.X.X (The X is a number), and you have a computer hosting the HTTP server at LAN address192.168.2.2 on your Wireless Broadband Router (192.168.2.1) controlled LAN. You can configure 192.168.2.2 to have portforwarding for port 80 (HTTP), then users on the Internet can go to http://X.X.X.X and get the HTTP server (192.168.2.2). Thedata traffic entering service port 80 will be directed to the computer (192.168.2.2), and other computers on your LAN will notsee this data traffic.For some internet applications (such as Internet messaging and gaming applications), you can configure this port forwardingsetting so that these applications can function correctly behind the firewall. These applications are required to have specificTCP/UDP ports. The ports for these applications and the protocol type will depend on what Internet services you are using.Please check with your service provider or application's user manual to have the information first.Make sure you have the following ports setup as described below.1. Check the Enable box.2. Enter the desired name or description in the Service Name field.3. In the Incoming Ports field, enter a range of ports. If you want to specify only a single port number, enter the samenumber in both boxes.